10 person conference table in white oak

Ten comfortably: four along each side and one at each end. Twelve can fit at a squeeze, with five on each side.

Yes. We can make it longer, shorter, wider or narrower to suit your room, and in another wood. Message us at hello@ombahome.com with your room size and how many people you'd like to seat, and we'll suggest a size and send a quote.

Leave about 3.5 ft (1 m) between the table and the walls on every side, so chairs can pull out and people can walk behind them. For the 12 ft table, that means a room of at least about 20 × 12 ft.

We make each table to order in 8–10 weeks, including custom sizes.

No. The chairs in the photos aren't included, and we don't sell chairs at the moment.

You're welcome to visit our Vancouver workshop, near Triumph and Victoria, to see any piece we're working on.

Please message us at hello@ombahome.com to schedule a visit.

Yes, please request one here

For now, our conference tables are available in Metro Vancouver (Greater Vancouver) only. If you're further away, message us at hello@ombahome.com.

Yes. White glove delivery is included with every conference table: we carry it into your space, assemble it, set it in place and take the packaging away.

The one-piece top is 12 ft long and won't fit in most elevators. If your elevator, stairwell or hallways are tight, we build the top in two 6 ft halves that join underneath once they're in the room.

Before you order, send us your elevator's inside dimensions and door opening, and we'll confirm which version you need.

If your building requires it, yes. We'll set a delivery time with you ahead of time, so you can book the elevator and loading area.

Yes. The top attaches to the base with threaded inserts, so it can come off the base for a move. If it's built in two halves, those come apart too.

A lift-out lid in the middle of the top covers a channel inside the centre stretcher, where a power bar sits. Small notches at each end of the lid let cords come up through the top while it's closed, so laptops and phones charge right at the table.

The power bar's cord runs inside the centre stretcher to one end of the table, then down a groove in the leg, where a few small oak pins hold it in place. There's a groove at each end, so we run the cord down whichever side is closer to your outlet when we set the table up.

Yes. Each table comes with a black power bar with a long cord, so there are no extension cords inside the table.

Yes. Lift out the lid, tap out the small pins that hold the cord in the leg groove, and pull the power bar out through the opening in the top. A new one goes back in the same way.

The channel is about 3 in deep, so phone chargers and compact laptop chargers fit standing up under the closed lid. Larger power bricks may not.

Yes, as a custom option. Tell us how many people need power and where they sit, and we'll suggest a layout.

The whole table is solid white oak from North American mills, with no MDF, plywood or veneer. The top is 1.5 in thick, and the legs and stretchers are 2.5 in thick.

No. Three stretchers run the length of the table under the top: one down the middle, which also holds the power, and one set in from each long edge. With the 1.5 in top, they keep it flat and stiff along its full length.

Yes. The outer stretchers are set about 9.5 in in from the long edges, so nothing gets in the way of your knees, and the underside of the top sits about 28.5 in off the floor.

The boards in the top run the full length of the table, and the top attaches to the base in a way that lets it expand and contract across its width with the seasons.

No. The top attaches from underneath, so there are no visible screws on the top or sides.

Yes, we strive to grain match as best as possible though please note that every piece of wood is unique and therefore uniformity is not guaranteed.

Yes, the wood in all of our furniture, including the 10 person conference table, is kiln dried

Our conference tables are made in our Vancouver workshop.

We finish the table with Rubio Monocoat, a natural, non-toxic hardwax oil, then add a ceramic coating as standard. You can find more information on Rubio Monocoat's certifications here.

It adds a thin, clear protective layer that helps the top resist water, stains, scratches and fingerprints, and makes it easier to wipe clean. We add it to every conference table, since office tables see coffee cups, laptops and daily cleaning.

Wipe it with a soft, damp cloth and dry it. For stickier marks, use a little mild soap and water. Avoid harsh or abrasive cleaners, which can wear the coating.

Constant direct sun exposure will change the colour of the wood but not the integrity of the table itself.

Yes. Light marks usually wipe away. Deeper scratches can be sanded, re-oiled and recoated, and we're happy to help.

It comes with our 5 year warranty.

144 inches

48 inches

30 inches

1.5 inches. The legs and stretchers are 2.5 inches thick.